Double Glazed Door Lock Replacement
It may seem difficult to replace a double-glazed door lock however it's not that difficult with the appropriate tools. Replacing your window lock will improve the energy efficiency of your office or home and will also add security.
Begin by removing a screw for retaining from the faceplate of the lock cylinder. Make use of a screwdriver to turn the cylinder to the left.
Replacement Cylinders
Euro lock door cylinders or barrel locks are found in nearly all uPVC double-glazed uPVC doors. They offer security and reliability and have been proven to function. A cylinder may need to be replaced due to a stolen or lost key, but it could also be because of corrosion and aging. Our cylinders are available in a range of styles, sizes and finishes to match your door. Depending on your requirements you can select between cylinders with 1-star or 3-star ratings that are secured by insurance approved BSI Kitemarks.
Cylinder locks utilize a simple pin and barrel system that has been utilized in uPVC doors for a number of years. However, the drawback of these types is that they can be easily manipulated by burglars who use tools to "snap" them and gain entry to your home. We suggest replacing your cylinders with anti-snap cylinders to protect against this common method of burglary.
To take out the old cylinder, first of all open your door and locate the screw at the edge of your door between the handle that is outside and the inside handle. The screw will typically stand out from the rest of the screws because it's a different colour. This screw can be removed completely with a screwdriver. If the screw refuses to budge then try applying some 3 in 1 type of oil and leave it for about an hour. This could help, or you can chisel the head of the screw in the direction of unscrewing to slam it loose.
After you have removed the screws for the handle then loosen the cylinder by rotating it in any direction (the direction will depend on the side of your door the locking mechanism is located). Once the cylinder has become loose, move it towards you and then remove it. Then measure the cylinders length and width to find the replacement.
We provide a variety of half and full cylinders as well as a selection of specialised security cylinders that are rated for anti-snap and anti-bump. These cylinders are BSI kitemarked and Secured by Design accredited and provide high levels of physical security for your home.
Replacement handles
There are a variety of colors and styles to choose from when replacing the handles on a uPVC door. The most important thing is to ensure that the new handle fits correctly. The screw size and keyhole size should be identical. The best way to determine this is to follow our easy guide on how to measure for uPVC handles. This will allow you to get the most accurate measurements and ensure you buy the right handle. It's also worth thinking about upgrading to a more secure set of handles. This will make your uPVC door more secure, and will stop thieves from opening the lock.
You should be able to find replacement handles for your double glazed doors from most major uPVC handle manufacturers. Companies like ERA Avocet Millenco provide an extensive selection of lever and lever-lever handles available in different finishes. You can select one that comes with a snib for additional security.
Depending on your requirements you may need to replace the entire handle or just the handle lever. Most often, this is due to wear and tear, but sometimes it could be caused by a malfunction in the mechanism of the lock. If your lock is not working properly it is recommended to call an Locksmith. If you just need to replace the handle of the lock, you could do it yourself.
After you have taken your measurements after which you can compare them to the dimensions of replacement handles available on the market. The most commonly used size is the 92pz handle however, there are also 70pz and 68pz handles for uPVC doors. You should also ensure that the new handle comes with a compatible backset and faceplate. This will ensure that the screw holes are properly aligned and the lock in the door isn't damaged.
If you're replacing the handles on your door and would like to upgrade to a higher level of security, it's recommended to consider a Sold Secure SS301 or a 2* Kitemark set of handles. They're a great choice due to their approval by the police and come with an exclusive anti-drill and anti-pick features.
Replacement faceplates
Door keeps and faceplates are the last protection against intruders They signal to anyone who might be burglarized that your home is secure and stop them dead in their tracks. They are essential and should be purchased from a reputable hardware shop whether in person or online. This will ensure that you receive a durable device that will protect your doors and windows from damage and corrosion over time.
It is crucial to understand the distinction between a single-point uPVC locking system and multipoint uPVC one. They can be as different as apples and oranges. You'll need to choose the correct backset or faceplate according to the kind of lock you're installing. A 'backset' is the distance from the edge of the door to the center of the handle or the cylinder. A 'faceplate' is the metal band that is used to cover the edges around the mechanism. These are the key factors in determining which parts will be required for your new uPVC lock system. It's a matter of following the instructions on how to fit them!
door locks replacement stroud Repair My Windows And Doors
Depending on your preference There are many alternatives available to the replacement of locks for uPVC doors. They are usually designed to withstand force and provide greater security for your home. There are uPVC multipoint door locking systems that can be used in commercial premises as well. These are usually manufactured by reputable companies like Fullex central door lock gearboxes as well as Gardinia doors locks made of uPVC.
When choosing a new lock for your window, know the kind of backset you require and the faceplate that you require. Make sure that the new lock matches these to make sure it's safe and is properly fitted. For instance, if your current lock has a 35mm backset as well as split spindle, it may be advisable to buy a new uPVC door handle with a compatible gearbox, such as the Laird Saracen Surelock.
Also, make sure that the lock you select matches the dimensions of the handle and faceplate holes in your existing windows. This is crucial to ensure an effortless integration between the handle as well as the window lock.
Once you have selected the replacement lock, you should then install it in your window. It is a good idea to speak with your local locksmith during this process. They will be able to assist you in choosing the correct lock. It is also advisable to test the new lock.
To avoid this, you must replace your double glazed windows with a high-quality lock that is resistant to forced entry. This will secure your valuables and keep your family members safe from burglars. Replacing your window locks is a reasonable option that can increase the security of your property. It can be a challenge if you're not familiar with it. To succeed in this task it is essential to follow these steps.
